social media

Briquetting Presses MFP Series

Performance: 5 - 30 kg/h

The hydraulic briquetting presses of our MFP series press various woodworking residues such as sawdust, wood shavings and milling chips as well as grinding dust into dimensionally stable, rectangular briquettes measuring 35 x 35 mm. Depending on the starting raw material, the length of the briquettes varies between 6 and 50 mm. It can also be pressed other materials such as paper dust, straw or miscanthus.
 
Our MFP briquetting presses are characterized by their compact, well-engineered and solid construction. Our machines can work in continuous operation. The maximum moisture content of the material to be pressed must not exceed 15% atro. The pressing process is carried out without the addition of binders - solely by the hydraulic pressing pressure. The volume can be reduced by up to 90% (depending on the material).
 
The briquetting presses of our MFP series are standardely built with hydraulic tank, drive unit, material silo and control unit. The material silo is 680 mm in diameter and has a filling volume of approx. 0.4 cubic meters. The control system is equipped with a motor protection switch and an on / off switch. The machines are standardely delivered in 400 V -50 Hz - 3 ph but can be supplied in 230 V for a small additional charge. Thanks to the innovative "Silent" hydraulic pump, the machines are extremely quiet. The sound pressure level is less than 62 decibels!
 
As an accessory, a briquette line can be delivered to the briquetting presses of our MFP series with which the briquettes can be transported into bags, cartons or in a briquette storage room.
 
The production of briquettes has the following advantages:
• Creation of a valuable substance from a residue material
• Reduction of volume by up to 90%
• Cost savings for storage and transport
• Cheap disposal
• Profitable sale
• Reduction of the risk of fire and explosion due to dust binding
• 2.1 kg wood briquettes correspond to a calorific value of 1 liter fuel oil

 

Technical Details:

MFP TD EN

(The kg/h outputs given in the table refer to a bulk weight of 200kg per cubic meter)

Directions

Exhibitions

10.05. - 14.05.2021 LIGNA Hannover

26.09. - 29.09.2021 W21 Exhibition Birmingham

29.03. - 01.04.2022 Holz-Handwerk Nürnberg

About Us

muetek Systemtechnik
Hartmut Müller GmbH
Fabrikstraße 20
70794 Filderstadt
Germany

Tel.: +49 (0)711 945 887-60
Fax: +49 (0)711 945 887-69
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.